INSTALLATION & SERVICE MANUAL Reverse Osmosis + DI Water Systems Model: RD-102 6-Stage RO+DI system, 100GPD, single output RD-106 6-St
10 Changing Filters Procedures • Shut off the system by turning off the water supply, and turn off the tank valve, open the spigot to depressurize
11 TROUBLE SHOOTING * For more detailed tech support notes & troubleshooting go to www.watergeneral.com NOTE: Turn off the system before
12 RECHARGING TANK PROCEDURE PROBLEMS: • When you turn on the spigot you get small water pressure and water flow. • When you turn on the spigot,
13 LIMITED ONE-YEAR WARRANTY 1. What your warranty covers: WaterGeneral Reverse Osmosis+DI Systems are warranted to the original owner to be free of
2 PRODUCT SPECIFICATION 6- Stage Reverse Osmosis + DI Water Purification Systems Model no: RD-102 and RD-106 Capacity: Generates 50 to 100 gall
3 Thank you for choosing Watergeneral Reverse Osmosis Water Systems. You now own a superb Reverse Osmosis (RO) + Deionization (DI) system that effec
4 About the system Reverse Osmosis process is a separation process. Tap water enters the system, and it is separated at the 4th stage membrane filt
5 3 ways to connect to water supply: (1) Connect to faucet, (2) Connect to garden hose or laundry room hose, (3) Install under the sink and connect
6 INSTALLATION (for under-the-sink installation) STEP 1: TAPPING INTO COLD WATER SUPPLY CAUTION: • The water supply to your RO unit MUST come fr
7 NOTE: The system uses compression fitting connections: When connecting tubing to the system, first, you must unscrew the compression nut off the
8 STEP 3: MOUNTING THE TANK BALL VALVE (for RD-106 only) Do not release air from the air valve on the lower side of the storage tank. It is pre
9 STEP 5: SYSTEM START-UP 1. Make sure all tubing are not kinked. 2. Turn Tank Valve to OFF position. (for RD106 only) 3. Turn RO faucet lever to
Comments to this Manuals